Internal battery CU 401 accessory Installation and operating instructions Montage- und Betriebsanleitung Notice d'installation et d'entretien Istruzioni di installazione e funzionamento Instrucciones de instalación y funcionamiento Instruções de instalação e funcionamento Οδηγίες εγκατάστασης και λειτουργίας Installatie- en bedieningsinstructies Monterings- och driftsinstruktion Asennus- ja käyttöohjeet...
Page 4
Installation and operation must comply with local regulations and accepted codes of good practice. 1. Applications The CU 401 control unit incorporates a back-up battery. The battery powers the internal clock of the CU 401. Note: The battery must be replaced every 3 years.
Page 5
• Remove the terminals and turn the locking screw to position "unlocked". Unlocked Locked • Remove the CU 401 unit from the DIN rail by lifting it out at the bot- tom. • Turn the CU 401 unit upside down.
This product or parts of it must be disposed of in an environmentally sound way: 1. Use the public or private waste collection service. 2. If this is not possible, contact the nearest Grundfos company or service workshop. Subject to alterations.
Page 11
Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence 96095197 0406 Repl. 96095197 1105 www.grundfos.com...
Need help?
Do you have a question about the CU 401 and is the answer not in the manual?
Questions and answers