Muth Mirror Systems Signal Installation Instructions Manual page 3

Explorer & Mountaineer - Door Panel Removal
1 2
5
4
Page 3
1. Start with opening the driver's side door and low-
ering the window.
2. Remove (2) screws on the bottom of door panel
(7mm Socket).
3. Using a nylon, non-scratchable, pry bar – pry, un-
snap and remove door handle cover (A&B). Re-
move the (2) revealed screws using a 7mm socket.
4. With a nylon, non-scratchable, pry bar – pry, un-
snap and remove control module cover (A). Re-
move the (2) revealed screws using a 7mm socket.
5. Lift control module up and out. Turn control
module over and disconnect all wiring connec-
tions.
3