Included Items; Required Tools - Muth Mirror Systems Signal Installation Instructions Manual

Professional Installation Recommended
:
Warranty does not cover damage to the vehicle or mirror housing due to improper installation. Muth Mirror Systems, LLC
(MMS) assumes no responsibility with regard to the accuracy of this information. MMS assumes no liability or responsibility
resulting from improper installation, even in reliance upon this information. Proper installation is the responsibility of the
installer. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.

INCLUDED ITEMS:

1-left and 1-right Signal mirror
®
1-left and 1-right wire h arness
2-wire taps
PLEASE READ INSTRUCTIONS PRIOR TO INSTALLATION.
1-ring connector
PROBLEMS OR QUESTIONS?
1-instruction manual
Technical Assistance is available by calling

REQUIRED TOOLS:

Muth Mirror Systems Technicians at:
Ratchet with e xten sion or ratch eting screwdriver
6 mm socket
1-800-844-6616
7 mm socket
8 mm socket
Monday through Friday
Socket wrench
Between 8:00 a.m. and 5:00 p.m. CST
T-30 Torx bit
Large slotted screwdriver
Small slotted screwdr iver Or through the Muth web site: www.muthco.com
Large Phil lips screwdr iver
Small Phillips screwdriver
Or via E-mail: techsupport@muthco.com
Small pry bar (nylon, non-scratchable)
Gopher rod (wire)
Ele ctrical tape
Wire crimper and stripper
*Explorer / Mountaineer installation instruction starts on page 3*
Needle nose plier s
Multimeter or wire tester
Sturdy gloves
*Ranger installation instruction starts on page 10.*
Safety glasses or goggles
Utility knife
Page 2