3: Setting Up The Pc - Toshiba RD-XS55KU Owner's Manual

3: Setting up the PC

Settings for the PC will be different depending on the operating system. Please read the user's manual of your PC for
details. The following instructions are for Windows
When using the PC with an always-on internet connection, the setting is normally already at "Auto"
(automatically obtained IP address). Therefore, no change in setting is required. Proceed to "4: Starting
Network Navi". If "Network Navi" does not start, change the setting for the recorder according to the setting
of the PC "TCP/IP properties".
Setting up the PC (when directly connecting to
the PC)
1 "Control panel" → "Network connections" →
click "Properties" of "Local area connection" →
click "Properties" of "Internet protocol (TCP/
IP)".
Select "Use next IP address" to set the IP address
and subnet mask.
When setting has been previously established,
keeping a record of the original setting prior to any
changes is recommended so that it can be
changed back.
1 "IP address":
Set to 192.168.1.10.
(Set an IP address that should be different from
that of the recorder.)
2 "Subnet mask":
Set to 255.255.255.0.
2 Click "OK" on the screen.
After clicking "OK", follow the instructions on the
PC. It may be necessary to restart your PC.
Proceed to "4: Starting Network Navi".
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
® XP.
Notes
• If you are connected to the internet, you may not be able to
connect if you specify the IP address. Change to the
original settings when connecting to the internet.
• When using Mac OS X, open "Apple Symbol" → "System
environment setting" → "Network" → "TCP/IP". Set the
setting method to "Manual input" and enter the IP address
and subnet mask.
q
w
151