Table of Contents
Advertisement
Recording
Recording a TV program (Continued)
To play a recorded title while recording another
on the same disc (Recorded Title Play)
HDD
DVD-RAM
During recording, you can play a title recorded on the
same disc.
1) While recording, press CONTENT MENU.
2) Press
/
/
/
press ENTER.
Playback of the selected title starts.
Pressing STOP button stops playback, and the
content currently being recorded returns. If you
press PLAY button, playback resumes from the
location you last stopped.
Notes
• The playback picture may appear after a delay of several
seconds.
• While you are using this function, the following operations/
functions are not available.
- Programmed playback (repeat playback, intro scan etc.)
- Editing (Playlist programming, dubbing, title/chapter
naming, title thumbnail setting, etc.)
• This function is not available during the 10 minutes
overlapped portion of the relay recording (
• Depending on the data condition, playback may pause.
• During a dubbing job, this function is not available.
When recording contents which will be copied
to a DVD-R/RW disc later on
Before recording, set "DVD compatible mode" (
page 184) to "On".
Each timer program must to be set its "DVD
compatible mode" from Quick Menu.
Creating chapters while recording
Press CHP DIVIDE button.
The content is divided into two chapters at the point
you pressed the button.
Note
• If you want to divide into chapters at desired points on
DVD-R/RW discs, use this method. On those discs, you
cannot create chapters after recording.
Creating chapters automatically at regular
intervals
Set "DVD-Video:CHP Create" (
48
to select a desired title, then
page 56).
page 185).
Advertisement
Table of Contents
