Recording
HDD
DVD-RAM
DVD-RW
Setting a timer recording using TV Guide On Screen
To record TV programs and end them automatically, follow the procedures of this chapter.
When using a satellite box, only manual timer recordings are available for setting recordings.
See
page 43.
Before setting recording, see "Before recording" (
Preparation
• When you record on a DVD-RAM/R/RW disc, load it into the recorder.
– Load a disc which has sufficient remaining space to record the program.
– Make sure the loaded disc is not write-protected.
• Make sure that the disc has enough space to record.
• Set "DVD Compatible mode" beforehand. (
• To record satellite TV programs, set a recording manually (
If you do not need to change recording options (recording mode or time range), see "With recording frequency
selection only" below.
If you want to change these recording options, follow the procedure of "Changing the recording options" procedure
(
page 41) or "Set recording by specifying details manually" (
With recording frequency selection only
Start
Note
• Recording will be executed on the defaut settings (
40
DVD-R
page 39)
1
Press TV Guide.
TV Guide
2
Press
ENTER
3
Press REC repeatedly to select the recording
frequency.
REC
page 32).
page 43)
page 43).
TV Guide On Screen LISTINGS appears.
/
to select a TV program to record.
For searching a TV program, see
Each time you press REC button, the icon changes.
For the icons, see
page 28).
page 24.
page 42.
®