Basic Setup; Initial Setting; Channel Setting - Toshiba DVR D-R17DTKB Owner's Manual

E7J70BD_EN.book Page 23 Monday, May 7, 2007 3:31 PM

Basic Setup

Initial Setting

Turn on this unit for the first time, you need to follow
these steps.
1
Press [ ON / STANDBY].
2
Turn the TV on. Select the input to
which the unit is connected.
3
Select your desired channel preset
type using [U / D]. Then press
[ENTER/OK].
Initial Setting
Auto Tuning
Make sure the antenna is
connected to "ANTENNA IN" jack.
Digital tuning
Digital & Analog tuning
Analog tuning
The unit will start getting channels available in
your area.
Digital tuning:
Only the DVB channels receivable in your area
are automatically scanned and memorised.
Digital & Analog tuning:
Both analogue and DVB channels receivable in
your area are scanned and memorised
automatically.
Analog tuning:
Only the analogue channels receivable in your
area are automatically scanned and memorised.
4
After finished channel setting,
"Clock Setting" will appear. Then
press [ENTER/OK].
Initial Setting
Clock Setting
01 / 01 / 2007 (MON)
• If you want to adjust the clock, follow to step 4
on page 31 in "Manual Clock Setting".
5
Press [ENTER/OK] to exit.

Channel Setting

Tuning of this unit to broadcast channels can be
performed in two ways.
Auto Tuning (DVB & ANALOG)
Programme the tuner to scan both analogue and DVB
channels you can receive in your area.
1
2
3
4
To cancel auto tuning
Press [RETURN/BACK] or [SETUP] during scanning.
Note
10:00
• The selection will be affected by how you receive TV
channels in your local area.
• If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
• You cannot change the channel when DVD is in any
recording mode (normal recording, One-touch Timer
Recording or timer recording).
In stop mode, press [SETUP]. Select
"General Setting" using [U / D],
then press [ENTER/OK].
General Setting Menu will appear.
Select "Channel" using [U / D], then
press [ENTER/OK].
Select "Auto Tuning (DVB &
ANALOG)" using [U / D], then press
[ENTER/OK].
The unit will start storing channels available in
your area.
General Setting
Playback
Display Auto Tuning (DVB & ANALOG)
Video DVB Channel Setup
Recording ANALOG Channel Setup
Clock
Channel
DivX
HDMI
Reset All
Wait for several minutes to finish channel storing.
• Analogue channels will be stored in channel
901-999 after it is scanned by this unit.
Press [SETUP] to exit.
You can select the channels memorised only in
this unit by using [PROG. / ].
23
EN