Table of Contents
Advertisement
Locating by entering the number of a desired section
HDD
DVD-RAM
DVD-RW
Normally titles, chapters, and tracks are numbered. By entering these
numbers, you can access a desired section.
1) Press T.SEARCH.
e.g.
Title
001
Chapter
0001
Search
2) Press
/
to select a section (title or chapter) you want to locate.
e.g.
Title
001
Chapter
0001
Search
3) Press the number buttons to enter a number of the section.
e.g. To enter 25, press "2", then press "5".
4) Press ENTER.
Notes
• Pressing CLEAR button resets the numbers. To clear the display, press T.SEARCH
button several times (depending on a disc).
• This method of locating a title is available only on a disc that contains title numbers.
• If a title is erased, the numbers of the following titles decrease respectively.
• When you record a new title (Original) on the HDD or a DVD-RAM disc, it is added
prior to current titles (Playlist), and each following title (Playlist) reference number will
advance by a factor of 1.
Locating a specific point by entering its elapsed time (Time Search)
HDD
DVD-RAM
DVD-RW
1) Press T.SEARCH.
You may have to press repeatedly, depending on a disc. Press the
button until the following display appears.
e.g.
Title
001
:
:
Time
00 00 00
Search
2) Press the number buttons and
the disc.
e.g. To enter 1 hour, 25 minutes, and 30 seconds
"0" → "1" → " " → "2" → "5" → " " → "3" → "0"
hour
3) Press ENTER.
Notes
• Some discs may not respond to this process.
• Some scenes may not be accessed precisely as you specified.
• This method for accessing specific locations is available only within the current title of
the HDD or a DVD-RAM/R/RW/DVD video disc or within a current track of a VIDEO
CD/audio CD.
• Pressing CLEAR button resets the numbers.
DVD-R
DVD-VIDEO
VCD
CD
If you are using a VIDEO
CD/audio CD, skip step 2.
When you want to
locate a chapter.
DVD-R
DVD-VIDEO
VCD
CD
/
to enter the desired time location on
minute
second
71
Advertisement
Table of Contents
