Channel Setting - Toshiba RD-XS24SB Owner's Manual

3) After setting all the items, press ENTER.
The following message appears.
Set date and time?
Yes No
4) Press / to select "Yes", then press ENTER.
The "Initial settings" menu returns.
Notes
• This recorder is provided with a calendar extending to
2069. (However, this does not mean that the recorder is
supported to 2069.)
• To go back to the previous menu, press the RETURN
button.
• To exit the menu, press the SETUP button.

2 Channel setting

Press / to select "Auto" or "Manual", then press
ENTER.
Auto : Automatically presets the receiving
channels of UHF E21-E69.
Manual : Manually sets the receiving channel and
channel skip.
Select "Manual" to set the channel if not set correctly
by "Auto".
Auto (Auto channel setting)
When you select "Auto" and press ENTER, the Auto
channel setting function automatically starts.
Auto Scan TV 24CH
Cancel
• The previous screen is displayed when the Auto
channel setting is completed.
• To cancel the Auto channel setting function while it is
running, press the ENTER button while "Cancel" is
highlighted.
page 29
page 29
• The Auto channel setting function may not work,
depending on the TV or radio reception or other
conditions. If the Auto channel setting function does not
work successfully, use the "Manual" channel setting
menu to enter the channel information.
Manual (Manual channel setting)
1) When you select "Manual" and press ENTER,
the following screen appears.
e.g.
Manual
Position Home CH
1
2
2-25
3
4
5
Tuning
range Channel number
Select
number
2) Press / to move the cursor to the receiving
channel ("Home CH") of a position ("Position")
where you want to set the channel.
e.g.
Manual
Position Home CH
6
7
8
9
10
3) Press PAUSE ( ) and select the tuning range
number for the receiving channel.
See the table below to obtain the tuning range
number.
Tuning range
Band
number
VHF
1
– (No display) UHF
CATV
2 CATV (IRELAND)
3 CATV (CCIR)
4) Press ADJUST (–/+) to set the receiving
channel.
Press SLOW/REV (
search the station that you want to receive.
5) Press / to move the cursor to "Station".
e.g.
Manual
Position Home CH
1
2
3
4
5
1/20
Station Skip MFT
22 BBC1 Off 0
28 BBC2 Off 0
2-25 I TV Off 0
3-32 CH4 Off 0
37 CH5 On 0
O O O
FRAME/ADJUST FRAME/ADJUST
Set
Return Adjust Clear
2/20
Station Skip MFT
- - - - - - On 0
- - - - - - On 0
- - - - - - On 0
- - - - - - On 0
- - - - - - - - -
- - -
O O FRAME/ADJUST
TV channel number
A – J (1 – 10), 11, 13,
E2 – E12 (82 – 92)
E21 – E69 (21 – 69)
X, Y, Z (71, 72, 73)
1 – 53 (48MHz to
464MHz, 8MHz steps)
S1 – S41 (1 – 41)
) or FWD/SLOW ( ) to
1/20
Station Skip MFT
22 BBC1 Off 0
28 BBC2 Off 0
2-25 I TV Off 0
3-32 CH4 Off 0
37 CH5 On 0
O O FRAME/ADJUST
29