2: Time and datesetting
Set the recorder's
clock. If it is not set correctly, the recorder
cannot perform
operations
other than playback.
Start
When the recorder is operated for the first time, begin
from step 3.
Press SETUP.
Press </1_ to select
"Initial
settings",
then
press SELECT/ENTER.
Press • / • to select
"Time
& Date setting",
then press SELECT/ENTER.
egI@
Press •/•
to select "Auto"
or "Manual",
then
press SELECT/ENTER.
Auto
: The recorder
will set the time and date.
Proceed
to step 5.
(This clock sets one time only.)
Manual : You can set the clock manually.
See "Manual
clock setting".
_
page 35
Select "Manual"
to set the clock if not set correctly
by
"Auto".
Auto clock setting
Press </1_ to select an item, then
press • / •
to select a detailed
setting.
e,g,
/
33