About These Instructions; General; Scope; Target Group - Lenord+Bauer MiniCoder GEL 2800 Mounting Instructions

Lenord + Bauer
1

About these instructions

1.1

General

This document is part of the product and describes mounting and connection.
● Read the instructions carefully before mounting.
● Follow all the information in the instructions to prevent damage to the product and
malfunctions.
● It is to be ensured the instructions are available to the personnel at all times.
● Keep the instructions for the service life of the product.
● Pass the instructions on to the subsequent owner or user of the product.
● Add every supplement provided by the manufacturer.
1.2

Scope

These instructions apply to the standard version of the encoder of series GEL 2800.
A product marked with a Y is a customer-specific version with customised features
and/or modified technical specifications. Depending on the customer-specific modifi-
cation, further documents or other documents may be required.
1.3

Target group

These Instructions are intended for electrical specialists and mechanics who are au-
thorised to mount and electrically connect devices and systems, to put them into op-
eration, and to label them under the terms of safety-related standards, as well as ma-
chinery operators and manufacturers.
1.4

Symbols, signal words and notes

The following symbols, signal words and notes are used in this document:
Instructions on preventing damage to the product
NOTICE
ESD sensitive item
Important information for understanding or optimising work processes
► Work step to be undertaken
→ page 29 Page reference to a different part of these instructions
GEL 2800
General
1 About these instructions
29