Details Screens
Library Configure Button
The Configure button brings up a screen that shows the configuration of the Library
interface. For SCSI interface libraries, the SCSI ID can be changed. For Fibre interface
libraries, the port may be enabled or disabled, and hard addressing may be enabled or
disabled. If enabled, the Loop ID may be set. The library must be rebooted for the new
configuration to take effect.
Use the keypad to edit the Loop ID number. The Clear key clears the current number
and lets you enter a new one. The Del key is used to backspace. The Save key returns to
the previous screen with the new value shown and options to Save or Cancel the
changes.
96258 • Revision B
23