Mac allister MJ10250XI Safety And Operation Instructions page 12

Fig. 9
Fig. 10
Front rail (1pc)
Hex bolts M6 x 16 (6pcs)
Flat washers 6 (6pcs)
Hex nuts M6 (6pcs)
Spring washers (6pcs)
Fig. 11
Fig. 12
NOTE: One hole (1) on the extension table must
be in the front after finished.
- Attach two supporting bars with the extension
table with flat washers 6, spring washers 6, hex
nuts M6 and hex bolts M6 x 16. Position the other
end of bars to cabinet with flat washers 6, hex
nuts 6 and hex bolts M6 x 16. (See Fig. 9-10)
- Finish the right extension assembly repeating
the procedure above.
4. To assemble the front rail (Fig. 11-13)
- Align the holes on the front rail with the
extension tables and main table.
- Secure the front rail in place with flat washers 6,
spring washers 6, hex nuts M6 and hex bolts
M6 x16.
12
Fig. 13