Sage Perfect Press SSG600 Instruction Book page 7

Care & Cleaning
Before cleaning, switch the On/Off switch
to the Off position and unplug the sandwich
press. Allow your sandwich press to cool before
cleaning.
Always clean your sandwich press after each
use to prevent a buildup of baked-on foods.
Wipe cooking plates with a soft cloth. If cooked
on food is not removed by this method reheat
the unit for 1–2 minutes, then brush with a little
oil or melted butter.
NOTE
• The cooking plates are coated with a
non-stick surface; do not use abrasives.
• Do not use spray-on non-stick coatings as
this will affect the performance of the
non-stick surface on the cooking plates.
STORAGE
1. Switch the On/Off switch to the Off
position and unplug the sandwich press.
2. Allow the sandwich press to fully cool.
3. Move the Adjustable Height Control clip on
the right hand side of the sandwich press to
LOCK position so that the top and bottom
cooking plates are locked together.
4. Wrap the power cord in the cord storage
area below the appliance.
5. The sandwich press is designed to be stored
at upright position for compact storage.
Store on a flat, dry, level surface.
WARNING
DO NOT IMMERSE ANY PART OF THE
SANDWICH PRESS IN WATER OR ANY
OTHER LIQUID.
Any other servicing should be performed by
an authorised service representative.
Guarantee
2 YEAR LIMITED GUARANTEE
Sage Appliances guarantees this product
for domestic use in specified territories for
2 years from the date of purchase against
defects caused by faulty workmanship and
materials. During this guarantee period
Sage Appliances will repair, replace,
or refund any defective product (at the
sole discretion of Sage Appliances).
All legal warranty rights under applicable
national legislation will be respected and
will not be impaired by our guarantee.
For full terms and conditions on the
guarantee, as well as instructions
on how to make a claim, please visit
www.sageappliances.com.
7