Sage the Tea Maker Compact BTM700 / STM700 - Electric Teapot 1.5L Manual

Components

1. Jug Lid
2. Scale Filter
3. Tea Basket Lid
4. Tea Basket
5. Handle
6. Jug Post
7. Glass Jug 1000ml water max. 800ml tea max.
8. Immersed Temperature Sensor
9. Tea Scoop
10. Power Base
11. Cord Storage
    Concealed under power base.

12. STRENGTH button
    Preset brew times recommended for mild, medium and strong brews of each tea type.
13. Tea strength indicator
14. SELECT/TEMP button
    Select the tea type/brew temperature recommended for green, white, oolong, herbal and black teas.
15. Temperature/tea type indicator
16. KEEP WARM button
    Keeps brewed tea or heated water warm for up to 60 minutes.
17. START/CANCEL button
    Starts and stops the heating cycle.

Functions

BEFORE FIRST USE

In order to remove any dust or protective residues from the manufacturing process, it is recommended to run a boiling cycle then discard the water.

1. Remove and safely discard any packing material, promotional labels and tape from the Tea Maker™ Compact.
2. Remove the jug lid then remove the tea basket from the magnetic jug post within the glass jug. Wash the jug lid, tea basket, basket lid and tea scoop in warm soapy water with a soft sponge; rise and dry thoroughly.

Never immerse the base of the glass jug, the power base, power cord or power plug in water or allow moisture to come into contact with these parts.

3. Place the power base on a flat, dry surface.
4. Without the tea basket in place, fill the glass jug to the WATER MAX marking (1000ml) and place on the power base. Securely fit the jug lid onto the glass jug.

Never fill the glass jug with chilled water. Allow the Tea Maker™ Compact to cool before refilling.

Filling past the MAX line may result in serious burns or injuries as a result of overflowing hot or boiling water. Filling below the MIN line will result in the Tea Maker™ Compact switching off before the water has boiled or reached the selected temperature.

5. Unwind the power cord completely and insert the power plug into a grounded wall outlet.
6. Use the SELECT/TEMP button to select BLACK / 100°, then select the START/ CANCEL button. The light will change from red to white, indicating that the heating cycle is in progress.
7. Once the water has reached the selected temperature, the tea maker will beep once.
8. Discard the water. The Tea Maker™ Compact is now ready for use.

BREWING TEA

1. Fill the glass jug with the desired amount of water. Ensure that you fill past the MIN mark and equal to or below the MAX mark. Note the MAX mark when brewing tea is 800ml.
2. Place the tea basket on a flat, dry surface. Remove the basket lid by lifting it from the sides.
   
3. Use the provided tea scoop to fill the tea basket with tea leaves. As a general guide, use 1 scoop of tea per cup / 250ml of water; however, this will depend on the tea instructions and your personal preference.

4. Replace the basket lid and ensure it is securely clipped into place.
5. Attach the tea basket to the jug post inside the glass jug.
   
6. Replace the jug lid securely onto the glass jug, ensuring the filter aligns with the jug spout.

SELECTING THE TEA TYPE

1. The tea type determines the brew temperature. The Tea Maker™ Compact has 5 preset tea types recommend for optimal brewing of Green, White, Oolong, Herbal and Black teas.

NOTE
This product is not calibrated for commercial or scientific use. Temperatures may vary -+3°C, which is within range for optimal brewing for each tea variety.

2. Press the SELECT / TEMP button until the desired tea/temperature is illuminated. The desired brew strength determines the brew times. The correct brew time depends on the tea type and your personal preference of strength. The Tea Maker™ Compact allows you to choose from mild, medium and strong tea brews.
3. Press the STRENGTH button to select the desired strength / steeping time. Refer to the TEA TYPE table above for steeping times. Selecting the kettle setting will boil water to the desired temperature but will not operate the tea basket.
4. Press the START / CANCEL button to start heating.
5. Once the selected brew temperature is reached, the tea basket will automatically lower into the heated water. It will stay in this position until the brew time has lapsed.
6. At the end of the tea brewing cycle, the tea basket will automatically rise to the top of the glass jug to prevent over-brewing. The tea alert will sound 3 times, to indicate your tea is ready.

The tea basket is hot to touch after the tea is brewed. Ensure that the tea basket handle has cooled before handling.

KEEP WARM

If selected prior to heating, keep warm will last for 60 minutes after tea is brewed. When the glass jug is removed from the power base, the keep warm function will cancel.
To reactivate for another 60 minutes place the glass jug with the remaining tea back on the power base and press KEEP WARM, the light will illuminate when this is selected.

BOILING WATER

To boil water, remove the tea basket and fill the glass jug with water. Replace the jug lid and place the glass jug on the power base. Select the desired temperature by pressing the SELECT / TEMP button then press the STRENGTH button to select KETTLE.

Care & Cleaning

CLEANING THE GLASS JUG

• After each use, empty the glass jug.
  Do not allow brewed tea to stand overnight. Allow the glass jug to fully cool before cleaning.
• Wipe the interior of the glass jug with a soft damp sponge or rinse with warm water.
• Wipe the exterior of the glass jug with a soft damp cloth to clean.
  

Never immerse or wash exterior of glass jug under running water.

NOTE
Do not use chemicals, steel wool, or abrasive cleaners to clean the inside or outside of the glass jug as these may scratch the surface.

• To remove the build-up of tannin; the astringent chemical constituent of tea, remove the tea basket, fill the glass jug with water up to the MAX mark, bring water to the boil and allow to cool for one minute. Add the contents of the Sage Tea Maker Cleaner (available at Sage web page) and allow to stand for 5 minutes. Empty tea maker, refill with fresh water and bring water to the boil. Repeat this step again then rinse the inside of the glass jug thoroughly. Dry thoroughly with a soft, lint-free cloth before using.

NOTE
Through regular use over time, scale build-up can affect the performance and the life of the Tea Maker™ Compact. Lime and phosphate are common forms of scale that can damage your Sage Tea Maker™ Compact. Lime scale, a harmless mineral, comes in the appearance of white-coloured or rusty looking build up on the inner walls and inner base of the glass jug. Phosphate scale can't be seen; however it can cause the water to appear cloudy when heated. To prevent scale from damaging your Tea Maker™ Compact, ensure to descale the glass jug regularly. Use the Sage Descaler (available at Sage web page) and follow the instructions.

Causes skin irritation. Wash hands thoroughly after handling. Wear protective gloves/protective clothing/eye protection/ face protection.

NOTE
Allow all parts of the Tea Maker™ Compact to cool completely before disassembling and cleaning.

Never immerse the base of the glass jug, jug lid, power base, power cord or power plug in water or allow moisture to come in contact with these parts.

CLEANING THE BASKET

• Wash the basket lid and tea basket in warm, soapy water with a soft sponge, then rinse and dry thoroughly.
• A non-abrasive liquid cleanser or mild spray solution may be used to avoid build-up of stains on the basket. Apply the cleaner to the sponge, not directly onto the basket surface, before cleaning.
• Let all surfaces dry thoroughly before using.

CLEANING THE POWER BASE

• Wipe the power base with a soft-damp sponge.
• Let all surfaces dry thoroughly prior to inserting the power plug into the wall outlet.

STORAGE

• Ensure the Tea Maker™ Compact is switched off, cleaned and completely dry before storing.
• Ensure that the tea basket is correctly assembled.
• Ensure that the jug lid is securely in place on he glass jug.
• Wrap the power cord around the power cord storage under the power base.

Store the Tea Maker™ Compact upright on the power base. Do not store anything on top.

Troubleshooting