Sage Perfect Press SSG600 Instruction Book page 6

OPEN SANDWICH MELTS
1. Insert the power plug into a 240V power
outlet. Switch the On/Off switch to the ON
position. The orange 'POWER' light will
illuminate.
2. Allow the sandwich press to preheat with
the top cooking plate in the closed position
until the green 'READY' light illuminates.
3. Place sandwich to be melted on the bottom
plate. Always place sandwiches in the
center of the bottom cooking plate.
4. Open the lid and move the Adjustable
Height Control clip on the right hand side
of the sandwich press to OPEN MELT
position.
5. Slowly lower the top plate until it sits in the
OPEN MELT position.
6. The top plate will radiate the desired heat to
melt ingredients such as cheese.
7. Toasting melts should take approximately
5–7 minutes. However, exact toasting time
will be a matter of taste. It will also depend
on how far the food is away from the
top plate.
6