Table of Contents
Advertisement
System Maintenance and Information
11.1 Command Interpreter Mode
This option allows you to enter command interpreter mode, a "DOS prompt" type command interface,
which allows more advanced system diagnosis and troubleshooting (beyond the scope of this guide). See
the ZyXEL web site at www.zyxel.com for more detailed information on CI commands. Enter 8 from
Menu 24 – System Maintenance. A list of valid commands can be found by typing [help] or [?] at the
command prompt. Type "exit" to return to the SMT main menu when finished.
System Maintenance and Information
Prestige 316 Broadband Sharing Gateway / Wireless LAN
This chapter leads you through SMT Menus 24.8 to 24.11.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
Figure 11-1
Command Mode in Menu 24
Chapter 11
11-1
Advertisement
Chapters
Table of Contents
Troubleshooting
