Related Manuals for Avalue Technology SID-15V
Summary of Contents for Avalue Technology SID-15V
- Page 1 SID-15V 15.6" Open Frame Tablet with Cover/Stand/Smart Card Reader/Battery Quick Reference Guide Ed –20 April 2017 Copyright Notice Copyright 2017 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No. E2017S15VA0R...
- Page 2 (2) Use only shielded cables to connect I/O devices to this equipment. (3) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2 SID-15V Quick Reference Guide...
- Page 3 Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
- Page 4 Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
-
Page 5: Table Of Contents
Preparing the USB Key ......................23 2.4.2 Rebooting to Recovery Mode ....................23 2.4.3 Applying the Update ........................23 2.4.4 Completing the Update ......................23 2.5 Mechanical Drawings ....................24 2.5.1 Battery Drawing ......................... 24 2.5.2 System Drawing ........................25 SID-15V Quick Reference Guide... -
Page 6: Getting Started
Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis. 1.2 Packing List 1 x SID-15V 15.6" Open Frame Tablet with Cover/Stand/Smart Card Reader/Battery 1 x ACC-BAT-3SP1-01R ... -
Page 7: System Specifications
23 x 14 x 11” Shipping Dimension Shipping Weight 18 lbs. (Including Battery) Color Black Reliability EMI Test CE, FCC class B Operating 0°C ~ 40°C Temperature Operating Humidity 0% ~ 90% relative humidity, non-condensing Storage Temperature -20°C ~ 60°C SID-15V Quick Reference Guide... - Page 8 SID-15V Note: Specifications are subject to change without notice. 8 SID-15V Quick Reference Guide...
-
Page 9: System Overview
FIG. 2B: SYSTEM BOTTOM VIEW, NO COVER 1.4.3 Battery Connectors DOCK BAT2 Connectors Label Function Note Power Button Audio line-out connector HDMI HDMI connector 4 x USB 2.0 connector RJ-45 Ethernet DC IN DC Power-In connector SID-15V Quick Reference Guide... - Page 10 SID-15V Micro SD Card Slow BAT1 Motherboard Battery connector BAT2 Auxiliary Battery Board Battery connector DOCK Optional Battery Docking connector 10 SID-15V Quick Reference Guide...
-
Page 11: Battery Specifications (Optional)
If the battery packs are subject to storage for such a long term, it is recommended to recharge the battery pack periodically, every two-months. Storage Temperature 1 Month -20~60 ºC, 85 %RH Max 3 Months -20~45 ºC, 85 %RH Max 1 Year -20~20 ºC, 85 %RH Max SID-15V Quick Reference Guide 11... -
Page 12: Battery Handing
• Keep out of the reach of children. • Never use a battery that appears to have suffered abuse. • Store in a cool, dry, and well-ventilated area. • Dispose of in accordance with local regulations. Regulations vary for different countries. 12 SID-15V Quick Reference Guide... -
Page 13: Hardware Configuration
Quick Reference Guide 2. Hardware Configuration Note: If you need more information, please visit our website: http://www.avalue.com.tw SID-15V Quick Reference Guide 13... -
Page 14: Battery Installation (Optional)
Please make sure the unit is unplugged and powered off. • Lay the unit flat, screen side down, on a smooth surface. • Locate and open the hinged Top Cover (highlighted in blue). • Once opened, locate the battery bracket. 14 SID-15V Quick Reference Guide... -
Page 15: Removing The Battery Bracket
FIG. 3B: BATTERY BRACKET REMOVAL • Remove the 4 screws (M3x5) that secure the battery bracket to the system. • Remove the bracket from the system. • Locate the battery connection board under the bracket. SID-15V Quick Reference Guide 15... -
Page 16: Integrating The Battery
• Mount the battery bracket to the system using the 4 screws we previously removed. NOTE: It may be easier to integrate the battery into the battery bracket first, then mount the bracket on the system. 16 SID-15V Quick Reference Guide... -
Page 17: Completing The Installation
• The system can now be placed upright on a flat, stable surface. • Plug in the power cord and turn the system on. Verify the battery is being recognized by the system and is charging in Settings>Battery. SID-15V Quick Reference Guide 17... -
Page 18: Cable Management
RONT EMOVING ABLE OVER • Locate the Cable Cover on the Base Stand (highlighted in blue) • Remove the 4 screws that keep the cover in place and pull the cover off of the Arm. 18 SID-15V Quick Reference Guide... -
Page 19: Removing The Base From The Arm
Locate the 3 screws that hold the Arm to the Base. There are 2 underneath the unit, and 1 along the backside of the arm. • The arm should slide out of the hole in the base NOTE: Please use caution while other cables may be routed through this hole. SID-15V Quick Reference Guide 19... -
Page 20: Routing The Cables Through The Base
Arm and the bottom base plate. The cables should run through the pass-through along the back and hug around the arm up the top of the Bases hole opening. • Mount the Arm back onto the Base using the 3 screws that were removed earlier. 20 SID-15V Quick Reference Guide... -
Page 21: Cable Routing On Bottom Cover
2.2.5 Completing the Installation • Once complete, close and lock the Bottom Cover. • Reinstall the Cable Cover on the Arm. Make sure that all of the cables are not visible and hidden properly behind the Cover. SID-15V Quick Reference Guide 21... -
Page 22: Updating The Bios
Booting to the USB Key Plug the USB key into a USB port of SID-15V and power on the system. Please press “F12” repeatedly while the system is turning on to get into the boot manager of the BIOS. Here, please choose the USB Device as the boot device. -
Page 23: Updating The Firmware
2.4.2 Rebooting to Recovery Mode Power on the SID-15V-Z37-A1R System and load into the Android OS. Navigate to the “Settings” page. Scrolling down to the bottom of the page, click on the “About Tablet” page. Here, you will find the “Software Update” option to click on. Please press the “Reboot into recovery mode”... -
Page 24: Mechanical Drawings
SID-15V 2.5 Mechanical Drawings 2.5.1 Battery Drawing 24 SID-15V Quick Reference Guide... -
Page 25: System Drawing
Quick Reference Guide 2.5.2 System Drawing SID-15V Quick Reference Guide 25...
Need help?
Do you have a question about the SID-15V and is the answer not in the manual?
Questions and answers