Page 2
(2) Use only shielded cables to connect I/O devices to this equipment. (3) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2 OFT-07W03-B1 Quick Reference Guide...
Page 3
RF exposure compliance, in order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than 20 cm. OFT-07W03-B1 Quick Reference Guide...
Page 4
“CAUTION - Use a power cord that matches the voltage of the power outlet, which has been approved and complies with the safety standard of your particular country.” “WARNING – To avoid risk of electric shock, this equipment must only be connected to a supply mains with protective earth.” 4 OFT-07W03-B1 Quick Reference Guide...
1.2 Packing List 1 x OFT-07W03-B1 ⚫ 1 x Screw M3-4mm / ziplock bag No.00 40x60mm x1pc ⚫ 1 x power cord, AC/DC adapter 12V/5A 90 Screw Type (Option) ⚫ 6 OFT-07W03-B1 Quick Reference Guide...
Installing Extend Brackets Step1. Locate brackets on both sides, matching the holes on the monitor. Step2. Insert and fasten 8 screws on each side of the monitor to secure Mounting brackets. Note: Brackets sold separately. 12 OFT-07W03-B1 Quick Reference Guide...
Page 15
Quick Reference Guide Step2. Insert and fasten 4 screws on each side of the monitor to secure Front bracket. Screw Front Bracket OFT-07W03-B1 Item Part Name Quantity OFT-07W03-B1 Quick Reference Guide 15...
Page 16
OFT-07W03-B1 Step3. Insert and fasten 4 screws to secure Bracket R/L. Bracket R/L Screw Front Bracket Item Part Name Quantity 16 OFT-07W03-B1 Quick Reference Guide...
Page 17
Quick Reference Guide (Outside of the wall) Step4. Insert OFT-07WR1 Open frame into the wall. Wall Item Part Name Quantity OFT-07W03-B1 Quick Reference Guide 17...
Page 18
OFT-07W03-B1 (Inside of the wall) Step5. Fasten 4 screws to secure Panel mount brackets and insert it into Bracket R/L. Panel mount Screw Panel mount Bracket Bracket R/L Item Part Name Quantity 18 OFT-07W03-B1 Quick Reference Guide...
Page 19
Quick Reference Guide Step6. Insert and fasten 4 Panel mount screws to secure the module. Panel mount Screw Wall Item Part Name Quantity OFT-07W03-B1 Quick Reference Guide 19...
Page 20
OFT-07W03-B1 Step7. Paste the Decoration Plate on the Front bracket to complete installation. Decoration Plate Front Bracket Item Part Name Quantity 20 OFT-07W03-B1 Quick Reference Guide...
Quick Reference Guide 2. Hardware Configuration For advanced information, please refer to: 1- Motherboard included in this manual. Note: If you need more information, please visit our website: http://www.avalue.com.tw OFT-07W03-B1 Quick Reference Guide 21...
5 x 2 wafer, pitch 2.00 mm JSD1 Micro SD card slot JBAT1 RTC battery connector 2 x 1 wafer, pitch 1.25 mm JMIPI1 MIPI Port 40 x 1 FPC, pitch 0.30 mm JUIM1 Micro SIM Card socket OFT-07W03-B1 Quick Reference Guide 23...
Page 24
Warning: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions." Attention: Risque d'explosion si la batterie est remplacée par un type incorrect. Jetez les piles usagées selon les instructions. 24 OFT-07W03-B1 Quick Reference Guide...
Need help?
Do you have a question about the OFT-07W03-B1 and is the answer not in the manual?
Questions and answers