Hitachi DV 14DBL Handling Instructions Manual page 40

English
2. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that they are properly tightened. Should
any of the screws be loose, retighten them immediately. Failure to do so could result in
serious hazard.
3. Maintenance of the motor
The motor unit winding is the very "heart" of the power tool.
Exercise due care to ensure the winding does not become damaged and/or wet with oil or
water.
4. Cleaning of the outside
When the driver drill is stained, wipe with a soft dry cloth or a cloth moistened with soapy
water. Do not use chloric solvents, gasoline or paint thinner, for they melt plastics.
5. Storage
Store the driver drill in a place in which the temperature is less than 40°C and out of reach
of children.
NOTE
Make sure that the battery is fully charged when stored for a long period (3 months or
more). The battery with smaller capacity may not be able to be charged when used, if
stored for a long period.
6. Service parts list
CAUTION
Repair, modifi cation and inspection of Hitachi Power Tools must be carried out by
an Hitachi Authorized Service Center.
This Parts List will be helpful if presented with the tool to the Hitachi Authorized
Service Center when requesting repair or other maintenance.
In the operation and maintenance of power tools, the safety regulations and
standards prescribed in each country must be observed.
Important notice on the batteries for the Hitachi cordless power tools
Please always use one of our designated genuine batteries. We cannot guarantee the safety
and performance of our cordless power tool when used with batteries other than these
designated by us, or when the battery is disassembled and modifi ed (such as disassembly
and replacement of cells or other internal parts).
40