Contactless; Customer Not Present (Cnp) / Manual (Keyed) Transaction - VeriFone VX 520 User Manual

SALE
£0.00 F1
F2
KEY IN AMOUNT F3
Enter confirms F4
F1
F2
Present / Insert Card F3
£1.00 F4
VISA
Acct# 4562587852364567 F1
Amount: £1.00 F2
Approved F3
F4
VISA
Yes F1
No F2
F3
Print Customer Copy? F4
8
www.firstpaymentmerchantservices.co.uk

Contactless

**Contactless payments are limited to a maximum
transaction value; please consult with the acquirer for
the transaction ceiling limit.
1. From the main menu screen, start keying in the
transaction value, then press the green Enter
to confirm the amount
2. The terminal will prompt for either the Chip card to
be inserted in the Smart reader or the Contactless
card to be presented to the contactless reader
above the screen. Request the merchant to tap
the contactless card above the screen, when the
card is presented – all lights should be illuminated
above the screen.
3. The terminal will display on the screen if the
transaction has been Approved or Declined.
a. Dependant on the transaction value an
additional Signature verification may
be required.
4. The terminal will print a Merchant copy of the
receipt and then prompt for a customer copy. If a
customer copy is required then press (F1), or else
press (F2)
20/04/12
16:58:29
IP
↓
key
SALE
£0.00
KEY IN AMOUNT
Enter confirms
Present / Insert Card
£1.00
SALE
£10.00
Insert, Swipe or Enter Card
Account #:
4444333322221111
SALE
£10.00
Account #: 4444333322221111
Exp Date MM/YY :
Enter expiry date
Customer Present?
www.firstpaymentmerchantservices.co.uk
Customer Not Present (CNP) / Manual
(Keyed) Transaction
Sale F1
Refund F2
1. From the main screen select Sale (F1).
Reports F3
2. The terminal will prompt for the transaction value.
Reversal F4
Once the desired amount has been keyed in
press the green Enter
incorrect, use the yellow
transaction value.
F1
3. The terminal will request for the card to be inserted
F2
into the smart card reader or presented to the
F3
contactless reader. Ignore this prompt and start
F4
keying in the long card number.
4. Once the long card number's been keyed in the
terminal will prompt for expiry date of the card.
F1
Key in the date in the format shown and then press
F2
the green Enter key.
F3
5. The terminal will prompt to check if the customer
F4
is present. If customer is present then select "Yes"
and the terminal will prompt to take an Imprint of
the card. Press Enter
once the imprint has been taken. If the customer is
F1
not present select "No".
F2
F3
F4
F1
F2
12 / 12 F3
F4
Yes F1
No F2
F3
F4
key. If the value entered is
Clear key to amend the
to continue the transaction
9