Handset Ringer Tone And Volume; Mute (Dkt2204-Ct Only); Handset Ringer Mute (Dkt2304-Ct Only); Vibrate Mode - Toshiba DKT2304-CT User Manual

Handset Operation
Handset Controls

Handset Ringer Tone and Volume

Press
handset in standby mode to select six ringer tones and volume combinations—
Ring Type A, B and C. Each ring type has two levels, high and low.

Mute (DKT2204-CT only)

Press the
room without the caller hearing you. The
Press the
Finishing the conversation can also cancel mute condition.
Note

Handset Ringer Mute (DKT2304-CT only)

You can temporarily mute the handset ringer tone. In standby mode, press and hold
ON/OFF MUTE
displays on the LCD. If you press and hold the key for two seconds again also in
standby mode, the icon disappears.

Vibrate Mode

With the handset not on the charging unit:
• (DKT2204-CT) Turn the Ringer Off Slide Switch to Off. The Ring Off icon
displays on the LCD.
• (DKT2304-CT) Press
the LCD.
The handset vibrates when there is an incoming call.
If you set the ringer Off with the handset on the charger, the handset rings as
Note
Ring Type-A Low.
28
R/VOL
(DKT2204-CT) or
MUTE
button on the side of the handset to consult another person in the
MUTE
button again to cancel the mute condition.
on the side of the handset for two seconds. The Ring Off icon
RING/VOL
Strata CIX and CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones
RING/VOL
(DKT2304-CT) on the side of the
Talk
icon blinks.
until the Ring Off icon displays on