3. INTERFERENCE OR STATIC
If you hear noise during a call, press
The TALK/BATT LOW LED blinks during changing a channel.
4. CHANGING THE RINGER VOLUME
Press
/
to select one of four ringer tone and volume combinations
during standby mode.
Each time you press
5. CHANGING THE HANDSET SPEAKER VOLUME
During a telephone call, press
levels; Max, High, Medium and Low,
The setting will remain in effect even after you hang up the current call.
Note
The Loud setting may be too loud because it is set for hearing aid compatibility.
6. REDIALING
Press
and then press
TALK
digits) will then be dialed again.
7. USING THE CALL WAITING SERVICE, ETC.
To use this feature, you must subscribe to the Call Waiting service.
When you hear a call-waiting tone while you are already talking on the
phone, simply press
To take the original call back, press
Note
Pressing
FLASH
without receiving a Call Waiting signal may disconnect the current caller.
CHANNEL
/
, the setting will change.
/
to select one of four speaker volume
. The last number called (up to 32
REDIAL
.
FLASH
11
to select another channel.
again.
FLASH