Step 2: Select Location; Step 3: Place Dkt3000-Series Telephones Into 2000-Mode - Toshiba DKT2304-CT User Manual

Installation

Step 2: Select Location

Step 2: Select Location
1. Select a location that is not subject to excessive heat or humidity. Keep the base
unit and handset away from sources of electrical noise, such as motors and
fluorescent lighting.
2. Determine if the base unit will sit on your desk or be wall mounted. If wall
mounted, go to
3. Place the base unit on a desk or tabletop near a standard 120VAC outlet and within
reach of the Strata CTX digital line connection.
Important!
Step 3: Place DKT3000-series Telephones
You must place your DKT3000-series telephone into 2000-mode before connecting
the cordless telephone; otherwise, the 3000-series telephone will not work.
In 2000-mode, the DKT3000 telephone operation changes are:
Only 16 characters by two lines display on the LCD.
•
LCD Feature button does not work
•
Spdial
•
To change DKT3000-series telephones into 2000-mode
1. On the DKT3000 telephone, press
2. Press
3. Press
mode.
Flexible Buttons (FB) are numbered from the bottom up and left to right.
Note
FB7
4. Press
5. Lift the handset to exit programming mode. Wait a few seconds for the telephone
to reset itself.
16
Step 6: "(Optional) Wall Installation"
Place the base unit to the right of the DKT. If placed on the left, the
cordless antenna picks up a tone due to its close proximity to the DKT
speaker and electronic parts.
into 2000-Mode
button does not work
#
.
FB7 FB10
(or on the DKT3014). LED On = 2000 mode. LED Off = 3000
for example would be the seventh button up on the left.
Hold
.
Strata CIX and CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones
on
3 6 9 Hold
+ + + (simultaneously).
page 19.