Mitel MiVoice 6910 User Manual page 13

When the configuration update is complete, the phone displays the following screens before it
displays the Home screen.
Network Connected/Network Disconnected
If your phone successfully connects to the network, the phone displays the Home screen.
If your phone did not successfully connect to the network, the Network Disconnected prompt is
displayed and the status light turns on. If this happens, check that the cables are firmly connected
to the phone and to the wall jack. The phone automatically detects when it is reconnected successfully
and the Network Disconnected prompt is removed from the screen. However, if changes have
been made to your phone's network settings, you may need to restart your phone. Check with your
Mitel administrator or network administrator for assistance.
For more information about connecting your phone, see the Mitel 6910 IP phone Installation Guide.
Note: If the phone displays a No Service status message, you can still use the phone, but note
that the phone is not registered with the system. For more information about registering your
phone, contact your Mitel administrator.
Plugging In and Starting the Phone
5