Operation
Operating the room light (cab version)
The starter switch is in the RUN position.
•
To turn the light on, depress the toggle switch (1). To turn it
•
off, press the switch in the opposite direction.
Operating the rotary beacon
The starter switch is in the RUN position.
•
Press the rotary beacon button (1). Press the button again
•
to switch the beacon off.
For canopy models, the rotary beacon is available as an accessory.
Charging plug
Open the cover cap (1) and put the load into the charging
•
plug.
The rated current of the plugged load must not
exceed 15 A.
81