Recovery, loading and transport
RECOVERY, LOADING AND TRANSPORT
Safety rules for recovery
For recovery of the excavator, a towing vehicle of at least the same weight class as the excavator must be
•
used.
A tow bar must be used for the recovery. If a tow rope is used, a braking vehicle must also be attached.
•
The tow bar or tow rope must be suitable for the recovery of the excavator in respect of the towed load. Do
not use damaged recovery aids.
Do not step into the danger zone between the vehicles during the recovery procedure. If a tow rope is
•
used, keep a distance of at least 1½ times the length of the rope.
Use the tow lug on the track frame for the recovery.
•
The above safety rules also apply if the excavator is used as the towing or recovery vehicle.
•
Observe the admissible values for the towed load and tongue load during recovery, see "Specifications"
•
(page 33).
Safety rules for hoisting the excavator with a crane
The lifting gear for hoisting must be suitable for the weight of the excavator.
•
Before the lifting gear is attached, check that the specified safety inspections have been performed and the
•
lifting gear is in perfect condition.
The excavator may only be lifted at the points provided. Do not attach the lifting gear to the cab roof as this
•
can lead to substantial damage.
Always adhere to the valid safety regulations for the lifting of loads.
•
The excavator must be secured with a holding rope when it is being lifted.
•
The crane operator is responsible for the observance of these safety rules.
•
24