Cleaning And Maintenance - Westfalia 80 56 55 Original Instructions Manual

(G) in direction I and move the spinning grinding stone over the tooth
against the depth limiter with the lever. Pull back the spring stop and move
the saw blade one tooth until all teeth have been machined.
3. If the teeth are offset, grind every second tooth and then readjust the
grinding angle to grind the remaining teeth.
4. To grind the back of the tooth bring the grinding stone into a position
according to the chapter Alignment of the Saw Blade on page 15.
The saw blade sharpener is delivered with an extra thin carbide grinding
stone, size 100 x 20 x 1 mm.

Cleaning and Maintenance

 Always pull the power plug before undertaking any kind of work on the
machine.
Always keep the machine clean and dry. Use only a slightly moist cloth to

clean the machine. Do not use aggressive chemicals or abrasives.
 Slightly oil moving part if necessary.
 The motor is maintenance-free. Always keep the ventilation louvers clean
and free from obstructions.
Assembly and Using
19