Maintenance And Cleaning - Westfalia 53 34 30 Instruction Manual

5. The correct way to hold the machine is to grip the casing towards the nose
firmly with thumb and index finger, just like holding a pen. Take care not to
cover the ventilation slots on the side cover of the machine. A whining noise
before start up is normal and no reason for concern.

Maintenance and Cleaning

First pull the power plug before cleaning the drill and milling machine.
Use a brush or similar to clean the ventilation slots.
Use a dry or slightly moist cloth to clean the machine. Do not use aggressive
chemicals such as bleach or solvents such as petrol to clean the machine.
Never immerse the machine in water!
Store the drill and milling machine in a dry location and protect it from dust
and dirt.
Using
7