Westfalia 80 56 55 Original Instructions Manual page 19

4. Insert the spike of the support arm (step 1) into
the slot as shown and secure it with the square
nut. Mount the support arm on the spike and
secure it with the mounting piece (step 2) and
the corresponding washer.
5. Mount the support pin for the spring adjustment
stop (D) on the base plate using the square nut
(step 1) and fix the pin with the spring adjust-
ment stop on the support (step 2).
6. After that slide the saw blade support into the
slot as shown and secure it with the square nut
from below.(step 3)
Assembly and Using
13