Live' Functions - Sony SNC-EMX30R User Manual

Network camera
4.2.2

'Live' Functions

You can adapt the Live page functions to meet your requirements. Choose from a variety of
different options for displaying information and controls.
1.
2.
Transmit audio
When selected, the audio from the camera (if set to On on the Audio page) is sent to the
computer. This setting applies only to the computer on which the selection is made.
Transmitting audio data requires additional network bandwidth.
Lease time [s]
The lease time in seconds determines the time beyond which a different user is authorized to
control the camera after no further control signals are received from the current user. After
this time interval, the camera is automatically available for another user.
Auto logout time [min]
Set a time frame (in minutes) for the automatic logout. Default value is 0 (no automatic
logout).
Show alarm inputs
(Only applicable to SNC-EMX cameras)
The alarm inputs are displayed next to the video image as icons along with their assigned
names. If an alarm is active, the corresponding icon changes color.
Show alarm outputs
(Only applicable to SNC-EMX cameras)
Alarm outputs are shown next to the video image as icons along with their assigned names. If
an output is switched, the icon changes color.
Allow snapshots
Specify whether the icon for saving individual images should be displayed below the live
image. Individual images can only be saved if this icon is visible.
Allow local recording
Specify whether the icon for saving video sequences locally should be displayed below the live
image. Video sequences can only be saved locally on your hard disk if this icon is visible.
I-frames-only stream
When this checkbox is enabled, the I-frames stream option, on the Connection tab of the Live
page is available.
Select to display an additional tab on the Live page where only I-frames can be viewed. Ensure
that I-frame quality is not set to Auto or no updates will occur.
Show 'Pre-positions'
Select to display or hide the pre-positions widget on the live page.
Path for JPEG and video files
Enter the path for the storage location of individual images and video sequences saved from
the Live page.
Video file format
Select a file format for the live page display. The MP4 format does not include metadata.
Click Set to apply the changes.
Sony Corporation
Select the check boxes for the functions to be displayed on the Live page. The selected
elements are checked.
Check to see if the desired items are shown.
User manual
Configuration | en 63
2019-07 | V01 | DOC