Sms Control; Firmware Upgrade - Suntek HC-350G User Manual

There are 2 ways for using:
1. Send SMS codes to camera directly
2. Install phone application, select function command
The SMS codes are:
Code Function
*530* Camera Start
*531* Camera Sleep
*500* Capture
*505* Capture and get pic(MMS mode)
*520* Get Pic information
This camera equipped with an automatic upgrade function, Upgrading is
needed only when an improved firmware is available. The operations are
as following:
1. Unzip the update file
2. Copy the .bin file to TF card.
3. Insert the TF card into the camera.
4. Power on the camera（Config Mode）.
5. The camera will read it and update itself automatically. When updating
the camera, its screen is black.

5. SMS Control

Meaning
Start Working
Stop Working
Camera takes a picture, then sends it to configured phone
or email
Camera take a picture, then sends it to current phone
Camera will send a text with picture number, SD card
capacity, battery lever.

6. Firmware Upgrade

20