Siemens SITRANS P 7MF4013 Instruction Manual page 120

Ordering Data
Ordering data
.
SITRANS P transmitter
for pressure, MS series
Two-wire system,
Smart version,
measuring cell filling: silicone oil,
measuring cell filling: normal
Span
0.03 to 1 bar (0.44 to 14.5 psi)
0.13 to 4 bar (1.9 to 58 psi)
0.53 to 16 bar (7.7 to 232 psi)
2.1 to 63 bar (30.5 to 914 psi)
5.3 to 160 bar (77.3 to 2320 psi)
13.33 to 400 bar
(193 to 5802 psi)
Wetted parts materials
Seal diaphr. Parts of measuring cell
Stainless steel Stainless steel
Version for remote seal
Process connection
• Connection shank G½A
• Female thread ½ - 14 NPT
Non-wetted parts materials
Housing made of die-cast aluminium
Explosion protection
• Without explosion protection
• With explosion protection (CENELEC)
Type of protection:
- "Intrinsic safety" (EEx ia)
- "Flameproof enclosure" (EEx d)
- "Intrinsic safety and flameproof en-
closure" (EEx ia + EEx d)
- "n" (zone 2)
• With explosion protection (FM + CSA)
Type of protection:
- "intrinsic safe and explosion proof"
1)
(is + xp)
Electrical connection/cable inlet
• Screwed gland Pg 13.5 (adapter)
• Screwed gland M20 x 1.5
• Screwed gland ½ -14 NPT
2
• Han 7D plug )
Display
• Without (digital display hidden)
• Housing cover with window and
digital display
• With indicator (digital display visible,
setting as specified, Order code Y21
required)
+
Note on Y21
The following pressure units can be selected:
bar, mbar, mm H O*), in H O*), ft H
2 2
2
psi, Pa, kPa, MPa, g/cm , kg/cm
(*) reference temperature 20 °C)
120
Order No.
7MF4013-
1 - 1
B
C
D
E
F
G
A
Y 0
0
1
0
A
B
1)
D
P
E
N C
2
) A
B
C
D
1
6
7
O*), mm HG, in HG,
2
2
, mA, Torr, ATM or %
■
Ordering data
Further designs
Please add "Z" to Order No. and spec-
ify Order code(s).
Transmitter with
mounting bracket made of
• Steel
• Stainless steel
Han 7D plug (metal, gray)
Han 8U plug (instead if Han 7D)
Rating plate inscription
(instead of German)
• English
• French
• Spanish
• Italian
English rating plate,
pressure units in inH O or psi
2
Manufacturer's test certificate M to
DIN 55 350, Part 18 and to ISO 8402
Acceptance test certificate B to
DIN EN 10 204-3.1B
Factory certificate to DIN EN 10 204-2.2
Setting of upper limit of
output signal to 22.0 mA
Digital indicator beside control keys
(only with transmitter
7MF4013-1 0-1A 6)
Use in or on zone 1D/2D (only together
with basic device with type of protection
"Intrinsically-safe")
Use in zone 0 (basic device EEx ia)
Additional information
Please add "Z" to Order No. and spec-
ify Order code(s) and plain text.
Measuring range to be set,
specify in plain text:
Y01: ... to ... mbar, bar, kPa, MPa, psi
Measuring-point number/identification
(max. 16 characters), specify in plain
text :
Y15: ...........................................
Measuring-point text (max. 27 charac-
ters), specify in plain text:
Y16: ...........................................
Entry of HART address (TAG) (max. 8
characters), specify in plain text:
Y17: ...........................................
Setting for digital display in pressure
units, specify in plain text (standard set-
ting: mA):
Y21: mbar, bar, kPa, MPa, psi, ...
(see "Additional information" for pressure
dimensions selectable for "Y21")
Only the settings for "Y01" and "D05" can be made in the factory.
Example of ordering:
Item line: 7MF4013-1EA00-1AA5-Z
B line: A01 + Y01
C line: Y01: 10 to 20 bar (145 to 290 psi)
Scope of delivery: Transmitter as ordered (Instruction Manual is extra
ordering item (see accessories on page 119)).
1
) Without cable gland.
2
) Not together with type of protection "Flameproof enclosure".
Order code
A01
A02
A30
A31
B11
B12
B13
B14
B21
C11
C12
C14
D05
D27
E01
E02
Y01
Y15
Y16
Y17
Y21
SITRANS P, MS series
C79000-B5674-C40-04