Memory Numbers; Wall Mounting; Technical Data - Topcom FIDELITY 1010 User Manual

Topcom Fidelity 1010

10 Memory numbers

You can program 3 Direct numbers (1 button) and
10 indirect memory numbers (2 buttons) - (max 16
numbers).
10.1 Adding a number to a Direct
Memory
Press the Program button
Enter the telephone number
Press the delete button briefly to
delete a wrongly entered number.
To confirm
Press the desired Direct Memory
button (M1-M3) or select a number
M?
from 0 to 9 as Indirect Memory
button.
10.2 Calling a Direct Memory number
Press the desired Direct Memory
M?
(M1-M3)
The phone number will be dialed
automatically.
10.3 Calling a Indirect Memory number
Press the Memory button.
Select the indirect memory number.
The phone number will be dialed
automatically.
10.4 Deleting a Direct Memory number
Press the desired Direct Memory
M?
(M1-M3)
Press the delete button briefly to
delete the number.
OK To confirm
6
10.5 Deleting a Direct Memory number
Press the Memory button
Select the indirect memory number.
Press the delete button briefly to
delete the number.
OK To confirm
10.6 Copying a number from the call
list to a direct or indirect memory
Press the New Message button
Scroll through the call list until you
have found the desired telephone
number.
To confirm
Press the delete button briefly to
delete a wrongly entered number
and make the necessary
modifications to the number.
To confirm
Press the desired Direct Memory
button (M1-M3) or select a number
M?
from 0 to 9 as Indirect Memory
button.
11

Wall mounting

Pull out and rotate the wall mounting hook (21).
Put it back in position.
Measure and mark the wall mounting locations
(24).
Drill holes, fit wall plugs and screw in screws.
The cable of the telephone can be fixed in the slot
(26) on the backside of the phone depending on
the telephone connection position.
Mount the telephone on the screws.

12 Technical Data

Dialling options: DTMF(tone) / PULSE
Flash:100/300/600ms
Topcom Fidelity 1010