Britax Safe-n-Sound BS4900A-020130 Series Instructions For Installation & Use page 15

CHILD HARNESS PREPARATION
A. Lengthen the Child Harness using the adjuster under the cover (see the Child Harness
instructions for the adjustment method). Press the Adjuster button (1) and pull the shoulder
strap (2).
2
1
Adjuster under cover
B. Feed the left hand Harness Strap & Cross
Strap through the shoulder slots that are just
above the child's shoulders. Make sure that
the Attachment Clip also feeds through to the
back of the restraint.
28
Instructions for Installation & Use - Series No. BS4900A-020130
Left hand Strap
Cross Strap
Attachment Clip
Feed left hand
Harness Strap
& Cross Strap
through right
hand slot.
CHILD HARNESS PREPARATION
C. Pull the left hand Harness Strap & Cross Strap
back through the opposite shoulder slot. Hook
the Child Harness Attachment Clip onto the
VERSATETHER™ Catch and ensure that the
straps are equal in length.
IMPORTANT:
Always adjust the height of the shoulder straps
as the child grows.
VERSATETHER™ is only intended for use in
attaching a child harness.
Instructions for Installation & Use - Series No. BS4900A-020130
Hook the Attachment Clip
onto VERSATETHER™
Catch.
Pull left hand harness strap
through the opposite slot until
the straps are of equal length.
29