How To Use - Britax Safe-n-Sound BS4900A-020130 Series Instructions For Installation & Use

HOW TO USE

USING WITH A LAP-SASH SEATBELT
A. With the Booster Seat installed in the
vehicle as described on the previous
page, check the backrest touches the car
seatback and the upper anchorage strap
is connected.
Sit your child on the seat. Ensure the
headrest is set to the correct height for
your child (See page 17).
B. Position the lap-sash belt over the
BOOSTER
child following the red
SEATBELT PATH
labels. Engage
seatbelt tongue into buckle, ensure there
are no twists in the belt. If the seatbelt
buckle is adjustable, adjust the buckle as
low as possible away from the child.
Remove any excess slack in the lap belt.
C. Fit the sash portion of the belt through the
sash guide on the headrest as shown.
IMPORTANT:
ALWAYS USE THIS SASH GUIDE
22
Instructions for Installation & Use - Series No. BS4900A-020130
Red
BOOSTER
SEATBELT
PATH
label
on each side
A
BOOSTER SEATBELT
Red
PATH
label on each side
Lap part
of seat
belt in
recess
area.
Engage buckle
Sash guide
D. Fit the SecureGuard™ Device to the
lap belt. Correct device adjustment
will position the lap belt directly across
the hips/thighs of the child. Ensure the
SecureGuard™ straps are adjusted
as described on page 19. Ensure the
bottom edge of the lap belt is in line with
the thighs. The SecureGuard™ Device
logo must be facing forward to the Lap
Belt.
E. Adjust lap and sash portion of seatbelt
firmly but comfortably across the child's
lap and chest.
F. Ensure all slack is removed from the lap
belt and is fed via the sash-belt back to
the retractor. The lap belt should fit firmly
across the hips/thighs and the sash belt
diagonally across the chest.
G. A loose or poorly fitted seatbelt may
cause preventable injuries if instructions
are not followed.
CAUTION:
ALWAYS USE THE SECUREGUARD™ DEVICE
The SecureGuard™ device must always be setup to position the lap belt correctly on
the child's hips and thighs. The occupant may be injured in an vehicle crash if the
SecureGuard™ device is set too high. DO NOT attempt to remove or dismantle the crotch
strap and SecureGuard™ device.
:
DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR.
Instructions for Installation & Use - Series No. BS4900A-020130
HOW TO USE
Follow arrows to remove slack
Ensure
Sash belt
both lap
across the
and sash
chest and
belts are
through the
in recess
sash guide
area
Ensure lap
portion is
in recess
area
23