Page 15
The following instructions are in english. Localized versions can be found with the QR-code below. guide.danalock.com...
Page 16
Add the Danapad in the Danalock App Open the Danalock App and add the Danapad by selecting ”Add device” in the menu tab. When the Danapad has been enrolled you can pair it with your Danalock. Go to: Menu > Accessory devices > Danapad > Pairing...
Page 17
Set up pin codes for your Danapad Go to: Menu > Accessory devices > Danapad > Pin codes and choose to add a new pin code. ******...
Page 18
Controlling the Danapad The Danapad is ready to use when it has been paired with a Danalock or Universal Module and has been set up with one or more pin codes. Locking: Press pin code followed by lock button. Success will respond with a single green blink.
LED-Signals The keypad indicates the status of several operations with different colors: LED signal LED color Status indication Long green blink Power on. Batteries are activated Red blink Device operation canceled/failed Green blink Device operation successful Constant orange light Device is ready to update Green while performing action Device is updating...
Operations Operation Input action LED response Turn on Danapad Insert batteries Display lights up green Activate light only press unlock button Display lights up green Clear input Hold unlock button Display blinks red once Input timeout Input clears after 10 sec with Display blinks red once no input Danapad lockout...
Firmware upgrade In the Danalock App navigate to your Danapad settings and select ”Firmware” and then ”Upgrade firmware”. Make sure to keep your phone near the Danapad during the entire firmware upgrade process.
Page 23
Terms of use The PADV3-BT is designed for outdoor use. This equipment is designed for use with the other danalock products V3 or UMV3 locks as an access panel in order to operate the lock by entering a security code. The PADV3-BT is normally mounted outside next to the doorframe on the wall.
Page 24
Warranty Danalock ApS products are covered by a limited manufacturer warranty. The Danalock ApS warranty is limited to the warranty rules and legislation present in each country. The warranty only covers manufacturing faults. The warranty does not cover misuse, wrong installation or damage due to a faulty installation or wrong maintenance.
Page 25
NOTICE statements according to CFR 47 Part 15.21: Changes or modifi cations made to this equipment not expressly approved by Danalock International Aps may void the FCC authorization to operate this equipment. Statements according to CFR 47 Part 2.1091 and RSS-102: With respect to radiofrequency radiation exposure Information it is declared that this equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Page 26
Japan The product is approved in Japan with the certifi cate ID n°: [R] 204-820259 This device is granted pursuant to the Japanese Radio Law (電波法) =当該機器には電波法に基づく、 技術基準適合証明等を受けた特定無線設備を装着 している This device should not be modifi ed (otherwise the granted designation number will become invalid) 本製品の改造は禁止されています。...
Page 27
Regulatory labeling: The PADV3-BT product are regulatory compliant to the following regulation (Europe, USA/Canada, Japan, Australia/NZ): REACH RoHS COMPLIANT 2011/65/EU Amendment 2015/863/EU FCC ID: 2ADSH-PADV3BT 204-820259 IC:12588A-PADV3BT Environmental The PADV3-BT environmental compliance coverage: Danapad (PADV3-BT) Environmental tests: Standards Compliance level Temperature Soak EN/IEC 60068-2-1, -25°C - +70°C, 48h...