Call Setup With Dial Preparation; Incoming Calls; Last Number Redial; Programming Memory Numbers - Topcom BUTLER 2600 User Manual

Butler 2600/DUO

5.1.2 Call setup with dial preparation

• Enter the desired telephone number. An incorrect number can be
corrected by means of the Mute button
pressed a button for 60 seconds, the number you've already
entered will disappear and the handset returns to standby mode.
• Press the Line button
automatically.
• Press the Line button

5.2 Incoming calls

• When a call comes in, the handset and base will start
to ring. The EXT symbol and the handset indicator LED will blink.
• Press the Line button
• When you pick up the handset from the base unit you are
immediately connected to the caller. You do not need to press the
Line button .

5.3 Last number redial

• Press the Line button
• Press the Redial button
will be dialled automatically.
• Press the Line button

5.4 Programming memory numbers

You can program 10 indirect numbers (of max. 20 digits) in the phone's memory.
• Press the Memory button
• Enter the telephone number you wish to save on this memory
location.
• Press the Memory button
Remarks :
• If you wish to insert a pause, press the Redial/Pause button
location where you want a pause

5.5 Calling a memory number

• Press the Line button
• Press the Memory button
memory location (0-9).
• The memory number will be dialled automatically.
• Press the Line button

5.6 Mute function

It is possible to deactivate the microphone during a conversation. Now you can speak openly without being
heard by your correspondent.
• Press the Mute button
will be deactivated. The MUTE symbol
• Press the Mute button
conversation.
. When you haven't
. The number will be dialled
when you want to terminate the call.
to answer the incoming call.
.
. The last number (with max. 20 digits)
when you want to terminate the call.
, followed by memory location (0-9).
. You will hear a confirmation tone.
.
, followed by the number of the
when you want to terminate the call.
during a conversation. The microphone
appears on the display.
again when you want to continue the
/P on the
32