Installation; Symbols - Topcom Butler 2000 C User Manual

Butler 2000 C

1 INSTALLATION

• Open the battery cover of the handset and insert
3 AAA NiMH batteries.
• Connect one end of the adaptor cable to the
electric socket and the other end to the adapter
connection (1) at the back of the charger.
Charging the Handset Battery
To charge the battery, position the handset on the
charger. Before you use the phone for the first
time, charge the batteries for 24 hours. When the
battery is almost empty, the battery symbol appears
on the display.

2 SYMBOLS

The first line of the display (1) :
The first line of the display shows a maximum of
12 numbers or letters.
The second line of the display (2) :
On the second line of the display 6 symbols are dis-
played indicating the operation status of handset.
0 0 0 0 0 0 0 0 0 0 0 0 0
1
2
ANTENNA
When the ANTENNA symbol appears on the
d i s p l a y, this indicates that the handset is
located within the working range of the base
unit. When the handset is out of the working
range of the base unit, "RANGE OUT" will be
visible on the display.
OFFHOOK
The OFFHOOK symbol appears when the
hookswitch is pressed to call and the
handset and base unit are connected.
40 40 40 40 40 40 40 40 40