Table of Contents
Advertisement
6.2.2 Memory capacity
The maximum capacity of the Allure 300 is 110 entries including names and numbers.
This number can be dedicated to the Phonebook and/or to the Caller ID list. In this setting
you have to select the capacity of the Phonebook.
Press
or
to select the phonebook memory 'MAX DATABANK = XXX (default 032)'
Press
to confirm the phonebook memory.
The Caller ID list memory size will be displayed briefly and the unit will go to standby mode.
To have access to the memory setting, you have to remove the batteries
for more than 10 minutes. All stored information will be erased after
initialisation.
7
Settings
7.1
Setting the language of the display text
When you did not change the language during initialisation, you can select it as follow:
•
Press
button for 3 seconds.
•
Press
or
to select the desired display language.
•
Press
to go to the next setting.
If no button is pressed within 10 seconds, the unit will return to standby mode.
!!! Only the words on the 3rd line of the display will be indicated in the
selected language. In standby the display will indicate 'ALL CALLS 000'
for indicating the number of stored calls in the call list only in English.
7.2
Setting the display contrast
You can select the desired contrast as follows:
•
Press
for 3 seconds, the display language is shown.
•
Press
again.
•
Press
or
to select the desired display contrast.
•
Press
to go to the next setting.
If no button is pressed within 10 seconds, the unit will return to standby mode.
Topcom Allure 300
Topcom Allure 300
9
Advertisement
Chapters
Table of Contents
