And Install Top Trim - GE ZICP720 Design Manual With Installation Instructions

6 POSITION REFRIGERATOR

AND INSTALL TOP TRIM

• Before pushing the refrigerators into the
opening, plug the power cords into the
receptacles. Reach into the top opening
to grasp the power cord. Pull the power
cord into the opening as you push the
refrigerator back.
• With hands against front corners,
push one refrigerator part-way into
the opening. The refrigerator should
be approximately 8" forward of the
back wall.
• Gently push the second refrigerator
next to the other. The doors should be flush to each
other and the inside trims together.
• Install corner bracket (M) into each side of the
top trim (A).
• Place the top trim across the top of the refrigerators
and slip the corner brackets into the outside case
trims.
Installation Instructions
Approx. 8"
Soffit
Corner Trim
Bracket
10
• Install 8 screws (I) through the top of the trim and
into the top case.
• Check to be sure the inside trims are aligned top
and bottom. There should be a slight gap between
the case trims.
• Install the flat metal bracket (K) between the two
machine compartments. Slip the bracket under the
inside trim. Secure the bracket using the larger screws
(L), one on each side. Leave a 3/8" gap between the
screw head and the top surface of the bracket.
PUSH REFRIGERATOR INTO OPENING
NOTE: 2 PEOPLE ARE REQUIRED TO PUSH THE UNIFIED
REFRIGERATORS INTO THE OPENING.
• With hands against the front corners, gently push
the unified refrigerators into the opening or against
the back wall.
Drive screws
leaving a
3/8" gap
Slide bracket
beneath trim