Topcom Butler E300 User Manual page 12

Topcom Butler E300/Twin/Triple/Quattro
5.17 Changing the system PIN
The system PIN code (default = '0000') is used to protect various settings like register rights,
access right to some menu's in the phone. You can change the PIN:
Press Menu button
Use the Up or Down
Enter the new PIN and press OK
.
5.18 Switching the ECO (low radiation) mode ON/OFF
When low radiation is activated the base will emit 10% less during standby compared to the
normal power mode. During communication the handset power will be reduced depending
on the distance between handset and base.
You can turn this function ON or OFF:
Press Menu button
Use the Up
press to confirm.
5.19 Using the alphanumerical keypad
With your telephone you can also enter alphanumeric characters. This is useful for entering
a name into the phonebook, giving a name to a hand-set, ...
To select a letter, press the corresponding key as many times as is necessary. For example
to select an 'A', press '2' once, to select a 'B', press '2' twice and so on. To select 'A' and then
B consecutively, select 'A', wait until the cursor moves on to the next character, then press
'2' twice.
To select a space, press 1. To erase a single character press the delete
all characters press and hold the delete
The keypad characters are as follows:
Key First
press
1 Space
2 A
3 D
4 G
5 J
6 M
7 P
8 T
9 W
0 0
8
Use the Down
button and select 'Change Pin'
Use the Down
or Down button and select 'Low Power'
Second Third
press press
1
B C
E F
H I
K L
N O
Q R
U V
X Y
button to scroll to 'System' and press
Enter the new PIN again to confirm and press
button to scroll to 'System' and press
key.
Fourth Fifth
press press
2
3
4
5
6
S 7
8
Z 9
Enter the old pin and press
Select ON or OFF and
key. To delete
Sixth Seventh Eighth
press press
Topcom Butler E300/Twin/Triple/Quattro
press