Answering Machine; Settings Controlled On The Base - Topcom BUTLER 4552 User Manual

Topcom cordless telephone user guide
Table of Contents

Advertisement

7

Answering Machine

The Butler 4552 has a built-in digital answering machine with a recording capacity of 11 min.
This answering machine can be controlled by the base only. The answering machine can be
operated remotely and features the possibility of recording two outgoing messages
(Message 1 and Message 2).
An internal voice will state various information, sush as day and time of the call, as well as
settings such as VIP code, ring delay... The language available of the internal voice is
indicated on the packing!
All messages and settings are stored on Flash-Memory and will not be
erased when the adapter is unplugged. Only the day/time settings will be
erased.
7.1

Settings controlled on the base

Two outgoing messages of 3 minutes can be recorded (OGM1 and OGM2).
Outgoing message 1 for the answering function and the possibility for callers to leave a
message.
Outgoing message 2 for the answering function without allowing callers to leave a
messages on the machine (answer only).
If no outgoing message is recorded, a pre-recorded outgoing message will
be used.
7.1.1 Setting the base speaker volume
To change the volume during playback of incoming or outgoing messages, press
increase or
to decrease. The volume can be set from '0'-'9'. If the volume is set to the
lowest position there will be no audible output during call screening and during remote
interrogation, but there will be a level '1' output for other operation.
7.1.2 Turning Answering Machine On/Off
If the answering machine is On, the
when there are new messages) and the machine will automatically pick up the line after a
number of rings (see 7.1.3 "Setting Number of Rings" on page 24).
If the answering machine is Off, the
Press
to switch On the answering machine.
A voice confirms the setting and playback the active OGM.
Press
to switch Off the answering machine.
Even if the answering machine is Off, it will automatically pick up after 10 rings to enable
remote activation (see 7.3 "Remote Operation" on page 26)
Topcom Butler 4552/Twin/Triple/Quattro
-LED on the base will light up continuously (or blink
-LED on the base will not lit.
Topcom Butler 4552/Twin/Triple/Quattro
to
23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BUTLER 4552 and is the answer not in the manual?

This manual is also suitable for:

Butler 4552 twinButler 4552 tripleButler 4552 quattro

Table of Contents