Advertisement
2 0 0
S E R I E S
P R E - I N S T A L L A T I O N
S P E C I F I C A T I O N S
M O D E L S 2 4 9 R , 2 4 9 R , 2 4 9 F F A N D 2 4 5
P R E P A R I N G T H E S P A C E
Step 1:
First, make sure that the opening where the
R O U G H - I N R E Q U I R E M E N T S
Sub-Zero is to be installed is properly prepared. Refer to the
Pre-Installation Specifications illustrations and chart to be
sure the space dimensions, electrical service and plumbing
are correct for the model you are about to install.
IMPORTANT NOTE: To operate properly, the door must
open a minimum of 90°. Use a minimum 2" (51 mm) filler
in corner installations to assure a 90° door opening. Allow
enough clearance in front of the unit for full door swing.
IMPORTANT NOTE: Make sure the floor under the refrig-
erator is level with the surrounding finished floor. Protect a
finished floor with plywood, cardboard or some other suit-
able material before moving the refrigerator across it.
4
Advertisement
