Advertisement
I C E M A K E R O P E R A T I O N :
After the water has been hooked up to the icemaker, lower
stop arm of icemaker.
NOTE: You will need to allow some time for product to cool
down sufficiently enough to produce ice. When the arm is
down, it signals the icemaker that the ice supply is low and the
icemaker automatically starts and replenishes the ice bucket.
It will shut off automatically when the bucket is filled.The first
time the icemaker operates, allow a few days for the bucket to
fill. You might notice the first few crescents of ice are discol-
ored.This is probably due to the new plumbing connection,
and you should discard the first 3 dumps of ice. Ice, if kept
over a period of time will stick together and crescents will
shrink. To avoid this, empty the ice bucket at least once a
month. (See Illustration 1.)
Illus. 1
2 0 0
S E R I E S
U N P A C K I N G T H E S U B - Z E R O
Step 5:
Unpack the unit, remove the unit shipping carton.
Remove the wood base by extracting all 4 levelers and then
discard the wood base. Reinstall all 4 levelers back into the
unit base assembly. Remove all packing materials and tape
as well. Do not discard the kickplate. Next, prelevel the unit
by adjusting the leveler legs prior to pushing unit back into
the installation.
WARNING
Keep door(s) and drawer(s) taped closed while moving
unit.
7 7
Advertisement
