Individual Call; Private Call; Making Private Calls - Motorola MTM800 FuG Feature User Manual

Mobile release 19
Hide thumbs Also See for MTM800 FuG:
Table of Contents

Advertisement

68015000585-MF
Chapter 5: Features
5.9

Individual Call

Individual call is a point-to-point call between two TETRA radios.
The available individual calls are:

Private Call

Phone Call
Private Automatic Branch Exchange (PABX) Call
5.9.1
Private Call
Private call, also called point-to-point call, enables communication between two individuals. No other
radio can hear the conversation.
This call type can be carried out in two ways:
Duplex Call
This call type is only allowed in Trunked Mode Operation (TMO). During this call, both parties can
speak at the same time.
Simplex Call
Available in TMO or Direct Mode Operation (DMO). Only one party can speak at a time.
5.9.1.1

Making Private Calls

Procedure:
1 From the home screen, enter a number.
2 If Private is not the first type of call presented, select it by repeatedly pressing Ctype.
3 If the Private Call Hook Customization feature is enabled, press Menu → Hook Method and
select the required hook method for simplex and duplex calls.
4 Press Done.
5 Depending on the mode, perform one of the following actions:
If...
If you are making simplex calls in TMO or
DMO,
If you are making duplex calls in TMO,
6 To end the call, press the End key.
NOTICE: If you are using the fist microphone or the telephone style handset, replace it
on its clip or holder to end the call.
130
Then...
a Press and hold the PTT button.
b Wait for the Talk Permit tone before talk-
ing.
c Release the PTT button to listen.
a Press the Send key.
b You hear a ringing tone until the called
party answers the call.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtm800 fug et

Table of Contents