Nl Control Panel And Display - ACV WaterMaster 25 Installation, Operation And Maintenance Instructions For The Installer And The User

EN
USER'S GUIDE
CONTROL PANEL AND DISPLAY
FR
1
NL
ES
IT
Panel Description
1. Pressure gauge - Indicates the primary circuit pressure (min. 1 bar when cold).
2. ACVMAX LCD Display - It is the setup interface of the water heater and indicates the parameter
values, the error codes and the set-up status of the parameters. It displays a series of screens, each
DE
showing information and/or icons. The main icons are detailed below.
3. Installer button - Allows the installer to access the menus of the ACVMAX controller to set up the
system.
4. Arrow keys and OK key - to browse through the screens of the ACVMAX controller, set up the water
heater, increase and decrease the displayed values and validate the selections and access the Easy
set-up screens. The OK key is also used to RESET the appliance after a locking (follow the instruc-
PL
tions on the screen).
5. ON/OFF master switch of the water heater - To turn the appliance ON and OFF.
RU
Main settings of ACVMAX Display
•
Screen backlight - it will illuminate when any button is depressed, and remain illuminated for five
minutes.
• Screen contrast - it can be adjusted at the Home screen by pressing and holding the OK button, then
pressing and holding the LEFT button along with the OK button. Press the UP and DOWN button
to increase or decrease the contrast while holding the OK and LEFT buttons depressed. All buttons
must be released and the procedure performed again to switch between increasing and decreasing
contrast.
en
6
2 3 4 5
Main Icons of ACVMAX display
DHW - indicates information related to the Domestic Hot Water circuit.
Home - to go back to the main menu screen.
Back - to go back to the previous screen.
Warm weather shutdown - displays on the home screen when the outdoor temperature
reaches the Warm Weather Shutdown preset temperature.
Reset - to reset the system to the factory settings.
Parameters - to access to the setup of controller parameters (language, units, etc.).
Easy setup - Indicates parameters that can be accessed through the EZ setup.
CH/DHW operation - Although this icon is active, the CH function is permanently disabled and
cannot be accessed.
Information - To get information on the water heater.
Typical items appearing on the Home screen:
The appliance type is indicated at the top of the screen. The type and model
are factory preset.
The appliance is represented in the centre of the Home Screen. Basic operat-
ing information such as supply and return temperatures are displayed as well
as current burner status.
A flame symbol is displayed when the
unit is fired. The flame size changes to
indicate the current firing rate.
Basic information. The user can
toggle the items using the LEFT
and RIGHT keys and view target,
Supply, Return, Domestic, Out-
door and System temperatures.
WaterMaster 25 - 35 - 45 - 70 - 85 - 120 : A1006482 - 664Y7300 • D
WaterMaster
Tap icon: indicates that a DHW call has
been received.
84°C
Circulator icons: indicate which circula-
tors are currently powered.
CH
DHW
61°C
P3 P4
Target = 85°C
Boiler Protection
Status line: displays the current operat-
ing state of the water heater. See "Status
Messages" on page 7.