Table of Contents
Advertisement
Power-on sequence
The controller boots with the operating system installed. Allow the controller to
run through its startup screens and start the operating system.
Power-off sequence
As with any PC, you should not shut down Windows-based instruments by
removing the power via an external power source or by pulling the power plug
out from the rear panel. This abrupt loss of power could corrupt the operating
system or cause your application to lose data. The proper shut down procedure is
to execute the Windows shutdown process and then turn off the chassis via the
chassis On/Off button.
Windows OS Versions
The M9537A AXIe Embedded Controller ships with either Windows 10 or WES 7.
You can identify the version of Windows you are running by looking at the start
button
Power down modes
The Keysight M9537A defaults to the Windows High Performance Power Plan.
This plan does not allow the use of Hibernate or Sleep mode.
10
With some AXIe Chassis, pressing the chassis power button
abruptly drops power from the controller without notifying the
controller OS to perform a shutdown. It has the same effect as
pulling the power plug and should be avoided.
Start Button ICON
Keysight M9537A AXIe Embedded Controller Startup Guide
Step 3: Install the M9537A Embedded Controller
Windows OS Version
Windows 10 Enterprise
2016 LTSB
Windows Embedded
Standard 7
Advertisement
Table of Contents
