Step 6: Verify Operation
Step 6: Verify Operation
Your M9537A AXIe Embedded Controller will work out of the box, just by
installing it in an AXIe Chassis and booting it up with a monitor, keyboard, mouse,
and with a LAN cable plugged in. Plug the LAN connection into the ESM RJ45
port. If you want to verify that it is operating correctly follow these simple steps:
Keysight M9537A AXIe Embedded Controller Startup Guide
1 Boot up the M9537A and verify basic Windows operation by using the
monitor, keyboard, and mouse.
2 Verify that you have network access by opening the browser to a web page
or by opening a command prompt and ping another host.
3 Start Connection Expert, click the Chassis Tab, and verify that your AXIe
Chassis is listed.
4 From Connection Expert, click Start Chassis Web Interface.
5 Click Start Chassis Soft Front Panel.
From the Web Interface, the indicator on the M9537A Front Panel
can be made to blink indicating communication with the chassis.
21