Sms (Text Messages); Writing/Sending Sms - Swisscom Classic S112 Manual

Open calls list
¢
f
Calls List: 01/02
q
Select entry.
The last incoming call is displayed in the calls
list.
Call back caller: Press talk key
Delete an entry: Press

SMS (text messages)

Your unit is supplied pre-prepared for the send-
ing of SMS.
When supplied, the access number
(062 210 00 0x) of the SMS centre from
Swisscom is pre-programmed. (The last digit
of the number (10th number) is automatically
set to 0!)
Requirements:
u
Calling Line Identification is enabled for
your phone line.
u
Your network provider supports SMS within
the fixed network (your network provider
can give you information about this).
u
You are registered with your service provider
to send and receive SMS.
SMS are exchanged between SMS centres that
are operated by service providers. You have to
enter in your unit the SMS centre through
which you want to send and receive. You can
receive from any of the entered SMS centres
once you have registered with your service pro-
vider.
Your SMS are sent via
An SMS is received and sent via
Service Centr.1 is preconfigured with the service
number of your service provider. For
Centr.2, you can enter the SMS centre number of
an additional provider, via which you would
also like to receive SMS on the fixed network in
addition to your initial service provider. The first
time you send an SMS, you will be registered
with the SMS centre of the SMS Service Centre
and can then receive SMS.
Character set chart for text entry, see page 13.
An SMS may contain up to 160 characters.
Please note:
To receive SMS you must be registered with
your service provider.
c
.
.
§Delete§
Service Centr.1.
Service Centr.1.
Service
After registering or cancelling a registration, re-
enter the number of the original SMS service
provider.

Writing/sending SMS

Writing/sending SMS
¢ ¢
SMS Write Message
§Menu§
~
Write SMS.
Send Text
§Menu§
Select and press
s ~
/ Select number with dialling code
(including the area code) from the
directory or enter it directly and
press
§OK§
The SMS is sent.
Note:
If an external call interrupts you while writing an SMS,
the text is automatically stored in the outgoing mes-
sage list.
Setting the input language
You are writing an SMS (page 7).
¢
Predictive Text Language
§Menu§
q
Select the input language and
press
§OK§
a
Press the end call key briefly twice
to return to the input field.
The setting of the input language only applies
to the current SMS.
Outgoing message list
You can store an SMS in the outgoing message
list and change and send it later.
Storing SMS in the outgoing message list
You are writing an SMS (page 7).
¢
Save Text
§Menu§
Opening the outgoing message list
¢ ¢
SMS Outgoing
§Menu§
You will see the first entry in the list, e.g.:
Saved 01/02
Maria
27.08.04 15:27
U
§Delete§ §Read
01/02: Number/total number of SMS
Reading or deleting individual SMS
¤
Open the outgoing message list.
q
Select SMS.
SMS (text messages)
.
§OK§
.
.
7